Show platform summary command

From NetworkCommands

A command available on Cisco Intelligent Gigabit Ethernet Switch Modules (CIGESMs) for IBM Bladecenter platforms only; used to provide information on the chassis type and slot the module is installed in, management interface IP addressing, native VLAN and management access configuration.

Usage Syntax

Configuration Context: Enable

show platform summary

Availability

Cisco Intelligent Gigabit Ethernet Switch Modules installed in IBM Bladecenter chassis only.

IOS versions: 12.1(14) and 12.1(22) only

Typical Output

12.1(22) - May 2006

Platform Summary:

Switch Slot: 1
Chassis Type: BladeCenter
Current IP Addr: 199.24.25.47, 255.255.255.0,  gw: 199.24.25.1
Default IP Addr: 10.10.10.91, 255.255.255.0,  gw: 0.0.0.0
IP Fields read from VPD: 199.24.25.47, 255.255.255.0,  gw: 199.24.25.1
Static IP Fields in VPD: 199.24.25.47  255.255.255.0  199.24.25.1
IP Acquisition Method used: static

Active Mgmt Module in Mgmt Slot: 2
Native Vlan for Mgmt Module Ethernet ports: 1
External Mgmt over Extern ports Enabled

Command Equivalents

The F5 command equivalent is the bigpipe platform command

Related Articles

Information on other Linux commands

Information on F5 BigIP commands

Information on Cisco commands

Information on Vyatta commands

Information on Extreme commands

Information on Blue Coat SGOS commands

Information on Nokia IPSO commands

We really do appreciate all feedback so please do send your comments, suggestions or corrections to steve#networkstuff.eu (replacing the # with an @)