Show module command
From NetworkCommands
A command available on most Cisco modular switch platforms; used to display information on installed modules (aka line cards or blades) including status, type, model, serial number and firmware version.
Contents |
Usage Syntax
show module [number]
Usage Examples
show module - display information on all modules
show module 3 - display information on module 3
Typical Output
4506 Chassis running 12.2(18)EW software;
Chassis Type : WS-C4506 Power consumed by backplane : 10 Watts Mod Ports Card Type Model Serial No. ---+-----+--------------------------------------+------------------+----------- 1 2 1000BaseX (GBIC) Supervisor(active) WS-X4515 JAE0812EY7W 2 6 1000BaseX (GBIC) WS-X4306-GB JAE08044SN0 3 48 10/100/1000BaseTX (RJ45) WS-X4548-GB-RJ45 JAE0811D7HF 5 48 10/100/1000BaseTX (RJ45) WS-X4548-GB-RJ45 JAE1048FAC1
M MAC addresses Hw Fw Sw Status --+--------------------------------+---+------------+----------------+--------- 1 0011.2043.a840 to 0011.2003.a8A1 3.1 12.1(20r)EW1 12.2(18)EW, EARL Ok 2 000b.5f4c.e43a to 000b.5f3c.e44f 2.2 Ok 3 000f.904f.d9b0 to 000f.90af.d94f 1.0 Ok 5 0019.e44a.9dc0 to 0019.e84a.9d4f 2.3 Ok
6509 Chassis running 12.2(18)SXD7b software;
Mod Ports Card Type Model Serial No. --- ----- -------------------------------------- ------------------ ----------- 7 2 Supervisor Engine 720 (Active) WS-SUP720-BASE SAD080403PM 9 4 CEF720 4 port 10-Gigabit Ethernet WS-X6704-10GE SAL093411NJ 13 48 CEF720 48 port 10/100/1000mb Ethernet WS-X6748-GE-TX SAL1114L5VR Mod MAC addresses Hw Fw Sw Status --- ---------------------------------- ------ ------------ ------------ ------- 7 000d.6546.1d28 to 000d.6546.1d2b 3.1 7.7(1) 12.2(18)SXD7 Ok 9 0004.2843.4d50 to 0004.2843.4d53 2.0 12.2(14r)S5 12.2(18)SXD7 Ok 13 001b.544a.05e0 to 001b.544a.060f 2.5 12.2(14r)S5 12.2(18)SXD7 Ok Mod Sub-Module Model Serial Hw Status --- --------------------------- ------------------ ------------ ------- ------- 7 Policy Feature Card 3 WS-F6K-PFC3A SAD080400D4 2.1 Ok 7 MSFC3 Daughterboard WS-SUP720 SAD08240165 2.2 Ok 9 Centralized Forwarding Card WS-F6700-CFC SAL1054AV70 2.1 Ok 13 Centralized Forwarding Card WS-F6700-CFC SAL1144F5VH 3.1 Ok Mod Online Diag Status --- ------------------- 7 Pass 9 Pass 13 Pass
Related Commands
The show power command can be used to display the power usage of each module.
The show environment command can be used to display temperature information for modules.
Command Equivalents
The closest Extreme command equivalents are the show slot and show version detail commands
